Structural Characterization Research Articles

Preparation and In vitro Evaluation of Folated Pluronic F87/TPGS Co-modified Liposomes for Targeted Delivery of Curcumin.

Using targeted liposomes to encapsulate and deliver drugs has become a hotspot in biomedical research. Folated Pluronic F87/D-α-tocopheryl polyethylene glycol 1000 succinate (TPGS) co-modified liposomes (FA-F87/TPGS-Lps) were fabricated for curcumin delivery, and intracellular targeting of liposomal curcumin was investigated. FA-F87 was synthesized and its structural characterization was conducted through dehydration condensation. Then, cur-FA-F87/TPGS-Lps were prepared via thin film dispersion method combined with DHPM technique, and their physicochemical properties and cytotoxicity were determined. Finally, the intracellular distribution of cur-FA-F87/TPGS-Lps was investigated using MCF-7 cells. Incorporation of TPGS in liposomes reduced their particle size, but increased the negative charge of the liposomes as well as their storage stability, and the encapsulation efficiency of curcumin was improved. While, modification of liposomes with FA increased their particle size, and had no impact on the encapsulation efficiency of curcumin in liposomes. Among all the liposomes (cur-F87-Lps, cur-FA-F87-Lps, cur-FA-F87/TPGS-Lps and cur-F87/TPGS-Lps), cur-FA-F87/TPGS-Lps showed highest cytotoxicity to MCF-7 cells. Moreover, cur-FA-F87/TPGS-Lps was found to deliver curcumin into the cytoplasm of MCF-7 cells. Folate-Pluronic F87/TPGS co-modified liposomes provide a novel strategy for drug loading and targeted delivery.

Preparation and characterization of pH-responsive metal-polyphenol structure coated nanoparticles

In this paper, tannic acid (TA) and Fe3+ were added to form a layer of metal-polyphenol network structure on the surface of the nanoparticles which were fabricated by zein and carbon quantum dots (CQDs) encapsulating phlorotannins (PTN). pH-responsive nanoparticles were prepared successfully (zein-PTN-CQDs-FeIII). Further, the formation of composite nanoparticles was confirmed by a series of characterization methods. The zeta-potential and Fourier transform infrared spectroscopy data proved that electrostatic interaction and hydrogen bonding are dominant forces to form nanoparticles. The encapsulation efficiency (EE) revealed that metal-polyphenol network structure could improve the EE of PTN. Thermogravimetric analysis and differential scanning calorimetry experiment indicated the thermal stability of zein-PTN-CQDs-FeIII nanoparticles increased because of metal-polyphenol network structure. The pH-responsive nanoparticles greatly increased the release rate of active substances and achieved targeted release.

Anti-obesity effects of fucoidan from Sargassum thunbergii in adipocytes and high fat diet induced obese mice through inhibiting adipogenic specific transcription factor

The prevalence of obesity has increased and is a health concern worldwide. Due to the concerns regarding synthetic anti-obesity treatments, nowadays natural products become a trend. Previous studies proved that there is a potential to use marine algae as anti-obesity agents. Therefore, in this study, the lipid inhibitory effect of crude polysaccharide of amyloglucosidase-assisted hydrolysate from Sargassum thunbergii (STAC) and its fucoidan fractions (STAFs) on 3T3-L1 cells and high-fat diet (HFD)-induced obese mice were investigated. According to the results, the STAF3, showed the highest xylose content and exhibited significant inhibitory effects on lipid accumulation by downregulating adipogenic and lipogenic proteins in 3T3-L1 cells. Furthermore, oral supplementation with STAC significantly declined gain in body weight and fat weight, and serum lipid contents in an HFD-induced obesity mouse model. Structural and chemical characterizations demonstrated that purified STAF3 has consistent surface morphology and small particle size, with similar structural characteristics as commercial fucoidan. Together, these results indicate that STAC and purified STAF3 from Sargassum thunbergia is a potent source to develop as ananti-obesity agents or functional food products to counter obesity.

Calcium-chelating peptides from rabbit bone collagen: characterization, identification and mechanism elucidation

This study aimed to characterize and identify calcium-chelating peptides from rabbit bone collagen and explore the underlying chelating mechanism. Collagen peptides and calcium were extracted from rabbit bone by instant ejection steam explosion (ICSE) combined with enzymatic hydrolysis, followed by chelation reaction to prepare rabbit bone peptide-calcium chelate (RBCP-Ca). The chelating sites were further analyzed by liquid chromatography-tandem mass (LC-MS/MS) spectrometry while the chelating mechanism and binding modes were investigated. The structural characterization revealed that RBCP successfully chelated with calcium ions. Furthermore, LC-MS/MS analysis indicated that the binding sites included both acidic amino acids (Asp and Glu) and basic amino acids (Lys and Arg). Interestingly, three binding modes, namely Inter-Linking, Loop-Linking and Mono-Linking were for the first time found, while Inter-Linking mode accounted for the highest proportion (75.1 %), suggesting that chelation of calcium ions frequently occurred between two peptides. Overall, this study provides a theoretical basis for the elucidation of chelation mechanism of calcium-chelating peptides.

Design and fabrication of functionalized curdlan-curcumin delivery system to facilitate the therapeutic effects of curcumin on breast cancer

We developed a facile method for the fabrication of a biodegradable delivery system composed of two blocks: curdlan and curcumin. This was achieved by chemical functionalization of curdlan through tosylation, amination followed by complexation with curcumin. A comprehensive evaluation of structural characterization and component stability showed that cur-cum complex exhibited better anticancer properties with enhanced thermal properties. The cur-cum complex shows pH sensitive sustained release behaviour with higher release at acidic pH and kinetic data of drug release follows the Korsmeyer-Peppas model. The cur-cum complex has ability to block the proliferation of the MCF-7 cell line as revealed by MTT assay which showed increased toxicity of cur-cum complex against these cell lines. The results obtained from western blot analysis demonstrated that the co-administration of cur and cum effectively induced apoptosis in MCF-7 cells. This effect was observed by a considerable upregulation of the Bcl-2/Bax ratio, a decline in mRNA expression of LDHA, level of lactate and LDH activity. The results clearly depict the role of functionalized curdlan as efficient carrier for curcumin delivery with prolonged, sustained release and enhanced bioavailability, thereby improving the overall anticancer activity.

Tribo-mechanical and structural characterizations of LLDPE matrix bio-composite reinforced with almond shell micro-particles: effects of the processing methodology

Abstract The objective of this research work is to examine the effect of mixing operation in the reinforcement of linear low density polyethylene (LLDPE) with almond shell powder (ASP). Two groups of bio-composites mixed in solid state and melt extrusion state were developed by the standard thermo compression molding process. For each group of bio-composites developed, the mass percentage of ASP was varied from 5 % to 40 %. Tensile and friction tests and micro structural analyzes were carried out. The main results show that the addition of ASP particles: decreases the maximum tensile stress and increases the rigidity of the two types of bio-composites produced. A significant improvement was observed in terms of maximum stress and Young’s modulus of the bio-composites mixed in the molten state compared to those mixed in the solid state. Microscopic observations concluded that the melt-blended ASPs were better covered by the LLDPE matrix and the dispersion was successfully achieved. Friction tests have shown an improvement in tribological performance thanks to the addition of an optimal percentage of ASP equal to 20 % in the case of bio-composites mixed in the molten state. From this research work, it can be concluded that the LLDPE/ASP homogenization method influences the mechanical and tribological properties of bio-composites.

Structural Characterization and Physiological Role of Bombyx mori Fibroinase in the Silk Gland Development.

Silkworm is a highly valuable insect that produces silk through secretion by a silk gland. Within this gland, a type of cathepsin L protease called Fibroinase was identified as an enzyme for hydrolyzing the primary components of silk, including fibroin and sericin. Here, we determined the crystal structure of Fibroinase fromBombyx mori at a resolution of 1.56 Å. Comparative structural analysis revealed that Fibroinase adopted a similar structural pattern with papain-type cathepsin, consisting of an N-terminal domain and a C-terminal domain. The interface between the domains forms a substrate-binding cleft, where the E64 inhibitor noncovalently binds in a novel manner. Additionally, computational simulations combined with biochemical analysis allowed us to define the binding mode and inhibition mechanism of physiological inhibitor Bombyx cysteine protease inhibitor (BCPI) with Fibroinase. Moreover, the expression profiles and RNA interference of Fibroinase indicated its critical role in removing silk proteins in the silk gland lumen and the destruction of silk gland tissue during the larval-pupal metamorphosis. These findings enhance our understanding of the structural and biochemical features of Fibroinase and its inhibitors, while also providing evidence for the physiological role of Fibroinase in silk gland development.

Structural Characterisation of End-of-Life Cement–Asbestos Materials from Lithuania

Asbestos is a widely used name for natural silicate minerals with fibrous properties. Asbestos minerals were one of the most popular and cheapest raw materials used in the construction industry in the past when they was used in the form of cement–asbestos composite material. Nowadays, we know that asbestos possesses carcinogenic properties. Due to this fact, asbestos was banned in many countries including Lithuania. All asbestos-containing materials are considered waste and stored in special landfills, which causes significant environmental pollution. One of the methods proposed to solve the asbestos problem may be thermal treatment. In the present study, asbestos-containing wastes in the form of cement–asbestos materials were examined. These asbestos-containing materials were characterised via chemical analysis (XRF) connected with mineralogical phase analysis with powder X-ray diffraction (XRD) as well as scanning electron microscopy (SEM). The thermal decomposition of samples was studied via differential thermal analysis (DTA) and thermogravimetric measurements with evolved gas analysis (TG–EGA). It was found that thermal treatment is a possible way to destroy asbestos contained in cement–asbestos wastes and convert it into new mineral phases. The work also compared the obtained characteristics of asbestos waste with the characteristics of waste produced in other countries.

Surface and Bulk Stabilization of Silicon Anodes with Mixed-Multivalent Additives: Ca(TFSI)2 and Mg(TFSI)2.

Silicon is drawing attention as an emerging anode material for the next generation of lithium-ion batteries due to its higher capacity compared with commercial graphite. However, silicon anions formed during lithiation are highly reactive with binder and electrolyte components, creating an unstable SEI layer and limiting the calendar life of silicon anodes. The reactivity of lithium silicide and the formation of an unstable SEI layer are mitigated by utilizing a mixture of Ca and Mg multivalent cations as an electrolyte additive for Si anodes to improve their calendar life. The effect of mixed salts on the bulk and surface of the silicon anodes was studied by multiple structural characterization techniques. Ca and Mg ions in the electrolyte formed relatively thermodynamically stable quaternary Li-Ca-Mg-Si Zintl phases in an in situ fashion and a more stable and denser SEI layer on the Si particles. These in turn protect silicon particles against side reactions with electrolytes in a coin cell. The full cell with the mixed cation electrolyte demonstrates enhanced calendar life performance with lower measured current and current leakage in comparison to that of the baseline electrolyte due to reduced side reactions. Electron microscopy, HR-XRD, and solid-state NMR results showed that electrodes with mixed cations tended to have less cracking on the electrode surface, and the presence of mixed cations enhances cation migration and formation of quaternary Zintl phases stabilizing the bulk and forming a more stable SEI in comparison to baseline electrolyte and electrolyte with single multivalent cations.

In situ structural characterization of Li3PS4 solid electrolytes under high pressure

In situ structural characterization of Li3PS4 solid electrolytes under high pressure

Synthesis, Spectral Characterization, and Structural Modelling of Di- and Trinuclear Iron(III) Monensinates with Different Bridging Patterns

In the present study, we report the solid-state isolation and structural characterization of novel iron(III) complexes of the veterinary antibiotic monensin. Monensic acid (MonH × H2O) forms a dinuclear complex of composition with FeCl3 [FeCl(Mon)2]2 (1), while its interaction with FeSO4 leads to the isolation of a triangular oxo-ferric coordination species [Fe3O(Mon × H2O)6(H2O)2(OH)] (2). During the procedure resulting in 2, oxidation of the Fe(II) ions by atmospheric oxygen was observed. In the presence of organic bases, both complexation reactions proceeded to successfully deprotonate the carboxylic function of the ligand. Iron(III) complexes 1 and 2 were characterized by IR, EPR, NMR, and Mössbauer spectroscopies as well as with thermal (TG-DTA/MS) and elemental analyses. In addition, the structures of the two coordination compounds were modelled and selected calculated parameters were compared with the experimental results. The biological assay revealed the enhanced antibacterial potential of the newly obtained complexes against the Gram-positive aerobic microorganisms Bacillus cereus and Bacillus subtilis.

Photodriven electron-transfer dynamics in a series of heteroleptic Cu(I)-anthraquinone dyads.

Solar fuels catalysis is a promising route to efficiently harvesting, storing, and utilizing abundant solar energy. To achieve this promise, however, molecular systems must be designed with sustainable components that can balance numerous photophysical and chemical processes. To that end, we report on the structural and photophysical characterization of a series of Cu(I)-anthraquinone-based electron donor-acceptor dyads. The dyads utilized a heteroleptic Cu(I) bis-diimine architecture with a copper(I) bis-phenanthroline chromophore donor and anthraquinone electron acceptor. We characterized the structures of the complexes using x-ray crystallography and density functional theory calculations and the photophysical properties via resonance Raman and optical transient absorption spectroscopy. The calculations and resonance Raman spectroscopy revealed that excitation of the Cu(I) metal-to-ligand charge-transfer (MLCT) transition transfers the electron to a delocalized ligand orbital. The optical transient absorption spectroscopy demonstrated that each dyad formed the oxidized copper-reduced anthraquinone charge-separated state. Unlike most Cu(I) bis-phenanthroline complexes where increasingly bulky substituents on the phenanthroline ligands lead to longer MLCT excited-state lifetimes, here, we observe a decrease in the long-lived charge-separated state lifetime with increasing steric bulk. The charge-separated state lifetimes were best explained in the context of electron-transfer theory rather than with the energy gap law, which is typical for MLCT excited states, despite the complete conjugation between the phenanthroline and anthraquinone moieties.

Stable, Self‐Adhesive, and High‐Performance Graphene‐Oxide‐Modified Flexible Ionogel Thermoelectric Films

AbstractIonic thermoelectric materials have attracted increasing attention because of their high flexibility and high Seebeck coefficient. However, their insufficient thermoelectric performance and long‐standing processing limit their practical applications. To achieve exotic ionic thermoelectric materials, here, a graphene oxide (GO) modified acrylamide ionogel is designed with high thermoelectric performance and flexibility. Detailed structural characterizations confirm that the uniform dispersion of GO particles in the ionogel structure enables a power factor of 753.0 µW m−1 K−2 and a promising ZT value of 0.19. Additionally, the as‐prepared ionic thermoelectric thin film shows excellent flexibility, stretchability, and self‐adhesiveness. An integrated device, assembled by the as‐prepared ionogel films, can generate an optimal output power density of 1.32 mW cm−2 with a temperature difference of 20 K, indicating great potential for wearable electronics. This work provides insight for searching long‐term, high‐performance ionic thermoelectric materials.

Identification and structural characterization of potential degradation products of baricitinib using liquid chromatography combined with quadrupole time-of-flight mass spectrometry

AbstractBaricitinib (BRT) is a drug substance with potent anti-inflammatory activity indicated in rheumatoid arthritis, atopic dermatitis, severe alopecia areata and recently for the treatment of Covid-19. Process impurities of the drug during its formulation are quite known, however studies regarding its degradation products (DPs) under stress conditions are limited. In this study, the drug was subjected to forced degradation under various degradation conditions, including acidic hydrolysis, alkaline hydrolysis, oxidative and thermal, to determine its inherent stability. To this purpose, a novel HPLC method was developed for the determination of degradation impurities of BRT. Alkaline hydrolysis test showed a selectivity towards breaking C–C bonds. This resulted to five DPs formed by chain scission reactions occurred at the pyrrolo-pyrimidine group between C6–C10 and C8–C9. Also, the ethylsulfonyl-azetidin-ylidene group was subjected to C–C bond cleavage at C12–C15 and C16–C18. Degradation products were further characterized with the use of liquid chromatography quadrupole time of flight tandem mass spectrometry (LC-Q-TOF-MS/MS).

An Analysis of Polysaccharides from Eight Plants by a Novel Heart-Cutting Two-Dimensional Liquid Chromatography Method

Natural polysaccharides are important active biomolecules. However, the analysis and structural characterization of polysaccharides are challenging tasks that often require multiple techniques and maps to reflect their structural features. This study aimed to propose a new heart-cutting two-dimensional liquid chromatography (2D–LC) method for separating and analyzing polysaccharides to explore the multidimensional information of polysaccharide structure in a single map. That is, the first-dimension liquid chromatography (1D–LC) presents molecular-weight information, and the second-dimension liquid chromatography (2D–LC) shows the fingerprints of polysaccharides. In this 2D–LC system, the size-exclusion chromatography–hydrophilic interaction chromatography (SEC–HILIC) model was established. Coupling with a charged aerosol detector (CAD) eliminated the need for the derivatization of the polysaccharide sample, allowing the whole process to be completed within 80 min. The methods were all validated in terms of precision, linearity, stability, and repeatability. The capability of the new 2D-LC method was demonstrated in determining various species of natural polysaccharides. Our experimental data demonstrated the feasibility of the whole systematic approach, opening the door for further applications in the field of natural polysaccharide analysis.

Characterization of FBA genes in potato (Solanum tuberosum L.) and expression patterns in response to light spectrum and abiotic stress

Fructose-1, 6-bisphosphate aldolase (FBA) plays vital roles in plant growth, development, and response to abiotic stress. However, genome-wide identification and structural characterization of the potato (Solanum tuberosum L.) FBA gene family has not been systematically analyzed. In this study, we identified nine StFBA gene members in potato, with six StFBA genes localized in the chloroplast and three in the cytoplasm. The analysis of gene structures, protein structures, and phylogenetic relationships indicated that StFBA genes were divided into Class I and II, which exhibited significant differences in structure and function. Synteny analysis revealed that segmental duplication events promoted the expansion of the StFBA gene family. Promoter analysis showed that most StFBA genes contained cis-regulatory elements associated with light and stress responses. Expression analysis showed that StFBA3, StFBA8, and StFBA9 showing significantly higher expression levels in leaf, stolon, and tuber under blue light, indicating that these genes may improve photosynthesis and play an important function in regulating the induction and expansion of microtubers. Expression levels of the StFBA genes were influenced by drought and salt stress, indicating that they played important roles in abiotic stress. This work offers a theoretical foundation for in-depth understanding of the evolution and function of StFBA genes, as well as providing the basis for the genetic improvement of potatoes.

STOPGAP: an open-source package for template matching, subtomogram alignment and classification.

Cryo-electron tomography (cryo-ET) enables molecular-resolution 3D imaging of complex biological specimens such as viral particles, cellular sections and, in some cases, whole cells. This enables the structural characterization of molecules in their near-native environments, without the need for purification or separation, thereby preserving biological information such as conformational states and spatial relationships between different molecular species. Subtomogram averaging is an image-processing workflow that allows users to leverage cryo-ET data to identify and localize target molecules, determine high-resolution structures of repeating molecular species and classify different conformational states. Here, STOPGAP, an open-source package for subtomogram averaging that is designed to provide users with fine control over each of these steps, is described. In providing detailed descriptions of the image-processing algorithms that STOPGAP uses, this manuscript is also intended to serve as a technical resource to users as well as for further community-driven software development.

Structural Characterization of a Pathogenic Antibody Underlying Vaccine-Induced Immune Thrombotic Thrombocytopenia (VITT).

Vaccine-induced immune thrombotic thrombocytopenia (VITT) is a rare but dangerous side effect of adenoviral-vectored COVID-19 vaccines. VITT had been linked to production of autoantibodies recognizing platelet factor 4 (PF4). Here, we characterize anti-PF4 antibodies obtained from a VITT patient's blood. Intact mass measurements indicate that a significant fraction of these antibodies represent a limited number of clones. MS analysis of large antibody fragments (the light chain and the Fc/2 and Fd fragments of the heavy chain) confirms the monoclonal nature of this component of the anti-PF4 antibodies repertoire and reveals the presence of a mature complex biantennary N-glycan within the Fd segment. Peptide mapping using two complementary proteases and LC-MS/MS was used to determine the amino acid sequence of the entire light chain and over 98% of the heavy chain (excluding a short N-terminal segment). The sequence analysis allows the monoclonal antibody to be assigned to the IgG2 subclass and verifies that the light chain belongs to the λ-type. Incorporation of enzymatic de-N-glycosylation into the peptide mapping routine allows the N-glycan in the Fab region of the antibody to be localized to the framework 3 region of the VH domain. This novel N-glycosylation site is the result of a single mutation within the germline sequence. Peptide mapping also provides information on lower-abundance (polyclonal) components of the anti-PF4 antibody ensemble, revealing the presence of all four subclasses (IgG1-IgG4) and both types of the light chain (λ and κ). This case study demonstrates the power of combining the intact, middle-down, and bottom-up MS approaches for meaningful characterization of ultralow quantities of pathogenic antibodies extracted directly from patients' blood.

Enhanced treatment of acute organophosphorus pesticide poisoning using activated charcoal-embedded sodium alginate-polyvinyl alcohol hydrogel.

The adsorption of activated charcoal is currently a major clinical treatment for acute organophosphorus pesticide poisoning (AOPP). However, the adsorption duration and efficiency of this method is unstable. In this study, a hydrogel embedding activated charcoal was prepared and its alleviating effects on AOPP were investigated. A composite hydrogel using sodium alginate and polyvinyl alcohol (SA-PVA) hydrogel was prepared in this study. The structural properties of the SA-PVA hydrogel were characterized via multiple analysis including FTIR, TGA, XRD, SEM, tensile strength and expansion rate. Based on these, activated charcoal (AC) was embedded within the SA-PVA hydrogel (SA-PVA-AC) and it was used for the treatment of AOPP. Structural characterization indicated SA-PVA hydrogel possesses excellent mechanical properties and biocompatibility. The invivo study demonstrated that SA-PVA-AC significantly alleviated the inflammation and oxidative damage in the liver, as evidenced by reduced levels of IL-6, TNF-α, and, IL-1β, SOD, and MDA. Furthermore, SA-PVA-AC treatment effectively re-regulated the activities of serum AST and ALT, exhibiting an improved effect on liver function. The findings suggest that activated charcoal embedded within SA-PVA hydrogel has significant potential as a therapeutic agent in treating AOPP, and offering a novel approach to managing pesticide-induced toxicity.

Structural Characterization and Bioactivity of a Titanium(IV)-Oxo Complex Stabilized by Mandelate Ligands

Research on titanium-oxo complexes (TOCs) is usually focused on their structure and photocatalytic properties. Findings from these investigations further sparked our interest in exploring their potential biological activities. In this study, we focused on the synthesis and structure of a compound with the general formula [Ti8O2(OiPr)20(man)4] (1), which was isolated from the reaction mixture of titanium(IV) isopropoxide with mandelic acid (Hman) in a molar ratio of 4:1. The structure (1) was determined using single-crystal X-ray diffraction, while spectroscopic studies provided insights into its physicochemical properties. To assess the potential practical applications of (1), its microcrystals were incorporated into a polymethyl methacrylate (PMMA) matrix, yielding composite materials of the type PMMA + (1) (2 wt.%, 5 wt.%, 10 wt.%, and 20 wt.%). The next stage of our research involved the evaluation of the antimicrobial activity of the obtained materials. The investigations performed demonstrated the antimicrobial activity of pure (1) and its composites (PMMA + (1)) against both Gram-positive and Gram-negative strains. Furthermore, MTT tests conducted on the L929 murine fibroblast cell line confirmed the lack of cytotoxicity of these composites. Our study identified (1) as a promising antimicrobial agent, which is also may be use for producing composite coatings.